LY303511 HCl

This product is for research use only, not for human use. We do not sell to patients.

LY303511 HCl
For small sizes, please check our retail website as below: www.invivochem.com
Size Price Stock
250mg$1240Check With Us
500mg$1750Check With Us
1g$2625Check With Us

Cat #: V3781 CAS #: 2070014-90-1 Purity ≥ 98%

Top Publications Citing Invivochem Products
Publications Citing InvivoChem Products

Product Promise

Promise
Molecular Weight (MW)342.82
Molecular FormulaC₁₉H₁₉ClN₂O₂
CAS No.2070014-90-1
Storage-20℃ for 3 years in powder formr
-80℃ for 2 years in solvent
Solubility In VitroDMSO: ≥ 45 mg/mLr
Water: N/Ar
Ethanol: N/A
SynonymsNV 128; NV128; EM 101; EM-101; EM101; LY303511; LY-303511; LY 303511; NV-128;
ProtocolIn VitroIn vitro activity: LY303511 is an analog of LY294002 and is also known as NV-128 and EM 101. Unlike LY294002 which is a BET/PI3K inhibitor, LY303511 is a potent mTOR inhibitor. LY303511 inhibits mTOR-dependent cell proliferation without unwanted effects on PI3K. In human lung epithelial adenocarcinoma (A549) cells, LY303511, like rapamycin, inhibited mTOR-dependent phosphorylation of S6K, but not PI3K-dependent phosphorylation of Akt. LY303511 blocked proliferation in A549 as well as in primary pulmonary artery smooth muscle cells, without causing apoptosis. In contrast to rapamycin, LY303511 reduced G(2)/M progression as well as G(2)/M-specific cyclins in A549 cells. Consistent with an additional mTOR-independent kinase target, LY303511 inhibited casein kinase 2 activity, a known regulator of G(1) and G(2)/M progression. In addition to its antiproliferative effect in vitro, LY303511 inhibited the growth of human prostate adenocarcinoma tumor implants in athymic mice. Given its inhibition of cell proliferation via mTOR-dependent and independent mechanisms, LY303511 has therapeutic potential with antineoplastic actions that are independent of PI3K inhibition. Kinase Assay: LY303511 is structurally identical to LY294002 except for a substitution of -O for -NH in the morpholine ring, and does not potently inhibit PI3K. Treatment of cells with LY303511 causes an increase in calcein spread similar to levels of LY294002. The ability of LY303511 to increase gap junctional intercellular communication (GJIC) does not occur concomitant with inhibition of phosphorylation of AKT as measured by immunoblotting. Cell Assay: LY303511 enhances TRAIL sensitivity of SHEP-1 neuroblastoma cells via H2O2-MAPK activation and up-regulation of death receptors. SHEP-1 cells are exposed to varying concentrations of LY303511 (LY30), TRAIL, and a combination of the two (1 h preincubation with LY303511 followed by TRAIL for 4 hours). SHEP-1 cells are responsive to TRAIL (~10%, ~15%, and ~30% reduction in the surviving fraction at 25, 50, and 100 ng/mL, respectively); however, treatment with LY303511 (12.5, 25, or 50 μM) has no effect on cell viability. However, incubation of cells with LY303511 (25 μM) for 1 hour followed by 4 hours exposure to 50 ng/mL of TRAIL has a strong synergistic effect (~40% reduction in viable cells with LY303511+TRAIL versus ~15% with TRAIL alone). LY303511 is a negative control compound with respect to PI3K activity. In MIN6 insulinoma cells, Wortmannin (100 nM) has no effect on whole-cell outward K+ currents, but LY294002 and LY303511 reversibly block currents in a dose-dependent manner (IC50=9.0±0.7 μM and 64.6±9.1 μM, respectively). Kv2.1 and Kv1.4 are highly expressed in beta-cells, and in Kv2.1-transfected tsA201 cells, 50 μM LY294002 and 100 μM LY303511 reversibly inhibit currents by 99% and 41%, respectively. LY303511 blocks currents with an IC50 of 64.6±9.1 µM, with a maximal inhibition of ~90% at 500 µM (n≥5 cells at each concentration. Human neuroblastoma SHEP-1 cells are maintained in DMEM supplemented with 10% fetal bovine serum and 1% Penicillin. In a typical survival assay, SHEP-1 cells (8×104 per well) plated in 24-well plates for 24 h are exposed to LY303511 (12.5, 25, and 50 μM), TRAIL (25, 50, and 100 ng/mL), and a combination of the two (1 h preincubation with LY303511 followed by TRAIL for 4 h). Cytotoxicity is determined by the crystal violet assay. After drug exposure, cells are washed with PBS and incubated for 20 min with crystal violet solution (200 μL). The excess crystal violet solution is washed away with distilled water, and the remaining crystals are dissolved with 20% acetic acid. Viability is determined by absorbance at 595 nm wavelength using an automated ELISA reader. Cell viability experiments are performed similarly with 2,000 units/mL of catalase, 4 μM JNK inhibitor SP600125, 10 μM p38 inhibitor SB202190, 20 μM MAPK/ERK kinase (MEK) inhibitor PD98059, 50 μM of caspase-8 inhibitor Z-IETD-FMK or pan-caspase inhibitor Z-VAD-FMK, or death receptor blocking antibodies (4 μg/mL anti-DR4 or 1 μg/mL anti-DR5), or in cells transfected with small interfering RNA (siRNA) for silencing JNK and ERK expression, respectively. Cells are preincubated for 1 h with LY303511 and the respective inhibitor or catalase before the addition of TRAIL. Similar sensitizing effect of LY303511 on TRAIL-induced apoptosis is carried out with SY5Y neuroblastoma, T98G glioblastoma, Jurkat leukemia, CEM myelogenous leukemia, HeLa ovarian carcinoma, and HT29 colorectal carcinoma cell lines
In VivoIntraperitoneal administration of vehicle or LY303511 (10 mg/kg/day) is performed when tumors reach a volume of ~150 mm3, at which time 35 mice have developed a tumor. After 21 days, >15% of the mice require euthanasia because of excessive tumor growth, and these data are censored due to unreliable estimates of average tumor volume. The administration of LY303511, 10 mg/kg/day, is sufficient to inhibit PC-3 tumor growth in vivo.
These protocols are for reference only. InvivoChem does not independently validate these methods.
Preparing Stock Solutions
Solvent volume to be added Mass (the weight of a compound)
Mother liquor concentration 1mg5mg10mg20mg
1mM2.9170 mL14.5849 mL29.1698 mL58.3397 mL
5mM0.5834 mL2.9170 mL5.8340 mL11.6679 mL
10mM0.2917 mL1.4585 mL2.9170 mL5.8340 mL
20mM0.1458 mL0.7292 mL1.4585 mL2.9170 mL
Quality Control Documentation
The molarity calculator equation
Mass(g) = Concentration(mol/L) × Volume(L) × Molecular Weight(g/mol)
Mass
=
Concentration
×
Volume
×
Molecular Weight*
The dilution calculator equation
Concentration(start) × Volume(start) = Concentration(final) × Volume(final)

This equation is commonly abbreviated as: C1 V1 = C2 V2

Concentration(start)
C1
×
Volume(start)
V1
=
Concentration(final)
C2
×
Volume(final)
V2
Step One: Enter information below
Dosage mg/kg Average weight of animals g Dosing volume per animal µL Number of animals
Step Two: Enter the in vivo formulation
%DMSO + % + %Tween 80 + %ddH2O

Calculation Results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in µL DMSO(Master liquid concentration mg/mL) ,Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation: Take µL DMSO master liquid, next add µL PEG300, mix and clarify, next add µL Tween 80,mix and clarify, next add µL ddH2O,mix and clarify.
Note:
  • (1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
  • (2) Be sure to add the solvent(s) in order.