Vinflunine (F12158)
This product is for research use only, not for human use. We do not sell to patients.
For small sizes, please check our retail website as below: www.invivochem.com
| Size | Price | Stock |
|---|---|---|
| 5mg | $150 | To Be Confirmed |
| 10mg | $235 | To Be Confirmed |
| 25mg | $409 | To Be Confirmed |
| 50mg | $610 | To Be Confirmed |
| 100mg | $920 | To Be Confirmed |
| 250mg | $1600 | To Be Confirmed |
: Cat #: V3768 CAS #: 162652-95-1 Purity ≥ 99%
Description: Vinflunine (F 12158, BMS 710485) is a new and semi-synthetic analog of the vinca alkaloid vinorelbine that is bi-fluorinated strucuturally. As a mitotic or tubulin inhibitor, it has anticancer, anti-angiogenic, vascular-disrupting and anti-metastatic properties. The major effects of Vinflunine on dynamic instability are a slowing of the microtubule growth rate, an increase in growth duration, and a reduction in shortening duration. The effects of Vinflunine on the readmilling rate is examined by following [3H]GTP incorporation into MAP-rich microtubules, and the IC50 is 0.42 μM.
Top Publications Citing Invivochem Products
Publications Citing InvivoChem Products
Product Promise
- Physicochemical and Storage Information
- Protocol
- Related Biological Data
- Stock Solution Preparation
- Quality Control Documentation
| Molecular Weight (MW) | 816.93 |
|---|---|
| Molecular Formula | C45H54F2N4O8 |
| CAS No. | 162652-95-1 |
| Storage | -20℃ for 3 years in powder form |
| -80℃ for 2 years in solvent | |
| Solubility In Vitro | DMSO: 100 mg/mL (103.4 mM) |
| Water: 66 mg/mL (68.3 mM) | |
| Ethanol: 11 mg/mL (11.4 mM) | |
| Solubility In Vivo | Saline: 30 mg/mL |
| Synonyms | Vinflunine; Vinflunine tartrate; vinflunine ditartrate; F 12158, F-12158, F12158, BMS 710485, BMS710485, BMS-710485 |
| Protocol | In Vitro | In vitro activity: The major effects of Vinflunine on dynamic instability are a slowing of the microtubule growth rate, an increase in growth duration, and a reduction in shortening duration. The effects of Vinflunine on the readmilling rate is examined by following [3H]GTP incorporation into MAP-rich microtubules, and the IC50 is 0.42 μM. Vinflunine induced mitotic accumulation with IC50 with 18.8 nM, which decreases the centromere dynamicity by 44% and increases the time centromeres spent ina paused state by 63%. Vinflunine ditartrate exhibits microtubule inhibition (purified tubulin and MTP) and cytotoxicity in L1210 cells with IC50 of (0.49 μM and 3.5 μM) and 97 nM, respectively. Vinflunine induces apoptosis in neuroblastoma SK-N-SH cells through a postmitotic G1 arrest and a mitochondrial pathway in a concentration-dependent manner with an IC50 with 50 nM. sup> Treatment of Vinflunine induces a rapid change in endothelial cell shape: cells retracts and assumes a rounded morphology. Mean IC50 values are 9.9 × 10-5 M × 10-5 M for fibronectin and 5.0× 10-5 M × 10-5 M for type IV collagen. A short 4 hours exposure of endothelial cells to Vinflunine at 10-8-4 M results in an inhibition of endothelial cell motility response to NIH3T3 cells-derived angiogenic factors. Inhibition is dose dependent, with a mean IC50 value of 7.1 × 10-7 × 10-7 M. Kinase Assay: Purified tubulin (17 μM) is polymerized into microtubules in the abence or presence of a range of vnflunine concentrations (35 minutes; 37 °C) in 75 mM PIPES, 1.8 mM MgCl2, 1.0 mM EGTA, and 1.5 mM GTP (pH 6.8) using sea urchin (Strongylocentrotus purpuratus) axonemes as seeds for assembly initiation. After incubation, polymerized microtubules are separated from unpolymerized tubulin by centrifugation (150,000 × g; 1 hour; 35 °C). The supernatant is aspirated, the sedimented microtubules are depolymerized in assembly buffer by incubation on ice (2 hours), and the protein content is determined. Cell Assay: Effects of Vinflunine on L1210 cell proliferation are determined using a standard growth inhibition assay. Exponentially growing L1210 cells (1.5 × 105 cells/well) in a 24-well plate are exposed to a range of concentrations of test compounds for 48 hours, prior to determining cell numbers using an electronic particle counter based on linear interpolation between data points. |
|---|---|---|
| In Vivo | Intravenous treatment of mice with Vinflunine, immediately before and 2 day after Matrigel implantation, results in a dose-dependent inhibition of the bFGF-induced angiogenic response, compared with vehicle-treated animals. Inhibition of haemoglobin content is significant at 1.25, 2.5 and 5 mg/kg, with no effect at 0.63 mg/kg (P > 0.05). An ID50 value (dose which inhibits 50% of bFGF-induced neovascularisation) is calculated as 1 mg/kg. Low doses of Vinflunine reduce the number of experimental liver metastases by human LS174T colon cancer cell. A slight overall decrease in liver metastatic foci is already observed at the very low dose of 0.16 mg/kg Vinflunine, although maximal overall inhibition is reached at the maximal tolerated dose (MTD) of 20 mg/kg. | |
| Animal model | LS174T tumor cells are injected into the spleen of BALB/C nude mice. |
These protocols are for reference only. InvivoChem does not
independently validate these methods.
| Solvent volume to be added | Mass (the weight of a compound) | |||
|---|---|---|---|---|
| Mother liquor concentration | 1mg | 5mg | 10mg | 20mg |
| 1mM | 1.2241 mL | 6.1205 mL | 12.2410 mL | 24.4819 mL |
| 5mM | 0.2448 mL | 1.2241 mL | 2.4482 mL | 4.8964 mL |
| 10mM | 0.1224 mL | 0.6120 mL | 1.2241 mL | 2.4482 mL |
| 20mM | 0.0612 mL | 0.3060 mL | 0.6120 mL | 1.2241 mL |
The molarity calculator equation
Mass(g) = Concentration(mol/L) × Volume(L) × Molecular Weight(g/mol)
Mass
=
Concentration
×
Volume
×
Molecular Weight*
The dilution calculator equation
Concentration(start)
×
Volume(start)
=
Concentration(final)
×
Volume(final)
This equation is commonly abbreviated as: C1 V1 = C2 V2
Concentration(start)
C1
×
Volume(start)
V1
=
Concentration(final)
C2
×
Volume(final)
V2
Step One: Enter information below
Dosage mg/kg
Average weight of animals g
Dosing volume per animal µL
Number of animals
Step Two: Enter the in vivo formulation
%DMSO
+
%
+
%Tween 80
+
%ddH2O
Calculation Results:
Working concentration:
mg/ml;
Method for preparing DMSO master liquid:
mg
drug pre-dissolved in
µL
DMSO(Master liquid concentration
mg/mL)
,Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:
Take
µL
DMSO master liquid, next add
µL
PEG300, mix and clarify, next add
µL
Tween 80,mix and clarify, next add
µL
ddH2O,mix and clarify.
Note:
- (1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
- (2) Be sure to add the solvent(s) in order.